Dublin: +353 1 626 8363 Cork : +353 21 439 7313 N. Ireland: +44 28 7187 8753

Wall & Roof Toppings – Preventing Intrusion to Your Property

We Manufacture and supply a wide range of rotating, rigid and barbed wire based obstacles to prevent intrusion over walls or roofs. We also fabricate special solutions for individual problems and all our Railing and Mesh Ranges can be adapted to suit your requirements.

Please read the following notice:

Advice on Usage of Wall Toppings By law a property owner or manager must prevent intrusion to any area or equipment where a person can be injured. Also by law an innocent or unsuspecting person cannot be injured by a deterrent which they contact accidentally or unexpectedly it is also highly illegal to place a danger where an intruder is lured into injuring himself (entrapment).   How does one reconcile these two legal positions? Firstly any of these products must be installed in a clear and obvious position. They should be fixed in a position where a casual passer-by cannot come in contact with them. As a general rule we believe that any deterrent placed in a clear and obvious position at a height of at least 2100mm above ground will be fully legally complaint. We would also recommend that where appropriate signs highlighting the deterrents presence and nature should be fixed. We can provide appropriate signage.

Rotating Deterrent

Knife Edge is a 300mm diameter multi point revolving fence in a hot dip galvanised finish which allows the spikes to rotate freely at all times with no risk of locking in position because of rusting. Can be provided with a variety of mounting brackets which makes it completely adaptable to all types of perimeter and access situations, tops of walls, fences and gates, roof edges, eaves of buildings in vertical or horizontal positions. Standard section length 2000mm assembled on site from kit form. Galvanised finish only.

Wall Spike

A Pressed Steel Spiked deterrent 100mm high by 1400mm long which can be affixed to walls, railings, or other structures. It can accommodate slopes and junctions. Available Galvanised or Galvanised and colour Powder Coated (Plasgalv®) finish to clients choice.

Drawings & Specifications

Please contact us – this section will be updated soon

Barbed & Razor Wire

Barbed tape concertina wire was developed to replace traditional barbed wire in its role to deter, obstruct and protect. The tape consists of a steel strip reinforced with high tensile wire and having hook or spear like barbs at close intervals.Heavy duty clips form a concertina configuration with diameters from 450mm to 980mm. We stock 450mm as standard. The coils can be attached to existing barrier fencing or used independently as a barrier line.The system is used widely in commercial situations.

    Upload a Photo, Drawing, Document or Zip Archive (8mb Max.)