Gate Automation for Security and Convenience

Automated Sliding Gates

Sliding, This is the simplest type of motor a cogged wheel on the motor engages with a toothed rack the gate, it runs on a track set in the ground. In order to use this type of system the gate needs sufficient space to run back the width of the opening plus between 500mm and 1000mm if this is possible it offers a convenient operation with few faults and minimal maintenance it maximises the space within the parking area.

Below Ground Operators for Swing Gates

Below gate operators are the neatest option for operating a gate or gates. The gate pivots on the motors which are buried and set in concrete. The motor box needs to be correctly positioned at the required pivot point. Below ground motors are our most popular swing gate operators but are more costly than the above ground options. This product requires expert installation to ensure correct operation and the avoidance of issues such as water penetration. Using our skilled fitters will ensure years of  top quality operation of your gate.

Above Ground Motors – Articulated Arm for Swing Gates

A very simple form of operator it has much greater tolerance for positioning of posts or it can be fitted to your existing gate posts or pillars.

• Able to open the gate at a faster rate than linear actuators.
• They do not place any extra load on the gate brackets and hinges
• Are able to handle much larger leaf gates with excellent duty cycles
• They are not as stylish as linear operators.

Remote Gate Operation

Operation of Your Gate can be by various means they have advantages and disadvantages. Push Button – Suitable where an operator has visual sight of the gate. Intercom or Video viewer; enables monitoring of visitors, prone to vandalism and tailgating. Key Pad – Always carries the risk of the code being passed on but very cost effective. Remote Control – Very convenient and popular method. Risk of user opening from long distance and allowing intruder to enter unseen. Card or Fob Reader –  Inexpensive to replace if lost, but difficult to ensure cards or fobs are not passed to undesirable people. Remotely using your mobile phone – The latest technology, very secure, enables control of large numbers of users.

Our Staff can assist you in making the right choice for your requirements.

Safety is foremost at Irish Fencing

In accordance with our legal requirements under S.I. No. 407/2008 – European Communities (Machinery) Regulations 2008. New automated gates have a requirement to be CE marked  to show that they comply with current legislation. Your automatic gate will have safety edges and photo cells to prevent contact injury or damage to vehicles, all trap points will be identified and protected . Our motors come with obstacle detection technology which reverse on contact and a visual movement signal generally a flashing light will be fitted to ensure your compliance with Health and Safety requirements. Ultimately you will be the responsible party for any machinery operating on your property so we recommend an annual service contract to ensure compliance with current standards. All our installers are PSA registered and fully trained. (see notice below).